Replacement Locks For Patio Doors at Lowe's
Replacing your patio door lock is a simple way to improve the security of you home. However the correct installation and regular maintenance are essential.
In order to successfully replace the lock on your patio door it is crucial to know what the type of your current lock is. You can determine the type by looking at the size of the screw hole and the type of face plate at the end.
Identifying Your Existing Lock
It's important to know the distinctions between different kinds of locks before deciding to purchase new hardware for your lock. This will help you to find the best replacement, ensuring that your home is safe and secure.
The most common type of lock is the cylinder lock, also referred to as pin and tumbler locks. This type of lock makes use of the top pins, bottom pins and springs to keep the key hole and plug secured. Cylinder locks come in a variety of different sizes, and it is important to determine the exact length and width of the cylinder you currently have before buying the replacement.
To measure the width, loosen the screws that hold the cylinder in place and then carefully remove it. Then, you can measure the distance in millimeters that lies between the outer edge and the inner part of the cylinder. Then, you can check this number against the measurements of the new lock you're planning to buy. This will ensure that the new lock will fit the existing door lockhole.
Another method to determine the correct size of the lock you have is to test it using a key. If the key easily slides into the cylinder, it is the same width as the rekey kit you require. If the key is unable to slide into the cylinder, then your cylinder could have a different keyway and therefore cannot be rekeyed so that it accepts the same brand of key.
It is recommended to read the manufacturer's instructions that come with a rekey kit, as each type of lock has its own unique set of installation requirements. It is essential to test the new lock thoroughly after installation to ensure it operates correctly and provides maximum security. It is also crucial to pay attention to any additional features your new lock might include, as they can affect how easy it is to operate.
Take a measurement of the Width
A patio door lock that is not functioning properly could cause serious security problems. It is crucial to examine your locks frequently and replace them if necessary. This helps ensure they are secure and functioning well, and can assist in preventing problems such as a loose latch or keyway. Lowe's has locks that can be replaced to provide your home with the security you require regardless of whether your locks are worn or damaged.
It is essential to take measurements of your patio door prior to buying a new lock. This will allow you to determine the right size lock to purchase and prevent the possibility of purchasing an unsuitable lock. fit. There are two measurements you need to complete this task which are the backset and case depth. The first refers to a distance between the edge of the lock's face and the center of the hole through which the handle spindle goes through. The second is taking a look at the depth of an lock from the outside.
It's also important to take into consideration how you use your doors when deciding what type of lock you'll need. For example, if your sliding doors open horizontally, you'll need to select a top and bottom tab lock that is able to engage with the strike plate, stopping the door from being lifted or forced open. If your patio doors open vertically, you'll have to select mortise locks that have a spring-loaded hook latch that adds additional security.
When determining the dimensions of your current lock, it's essential to note the exact location of the screw holes. Certain mortise lock screws are round while others are square. You'll also need to know the positioning of the keyway. Some keys have a vertical design, while others are angled at 45 degrees. It's a good idea to take a photo of the lock that is in use with your digital camera prior to attempting to remove it to ensure you get the right replacement.
Once you've taken your measurements, it's now time to search for an updated patio door lock. On the internet, you'll discover a wide selection of high-quality locks. Many branded products offer advanced security features that will protect your home. Choosing the right lock is an investment in your home's safety It is therefore essential to do some research and read reviews before making a purchase. Lastly, don't forget to regularly clean your locks to stop dirt and other debris from affecting the functionality of your doors.
Pay attention to the Screw Holes
Patio doors are an important aspect of the security of your home. They must be inspected for signs of wear to ensure they function correctly. Over time, the locks and spindle that connects the interior and exterior handles will require replacement. A durable lock not only prevents unintentional entry, but it also helps improve security, energy efficiency, and security.
If you don't know the specific type of lock your patio door has there are a number of options to narrow down your search to find the replacement. replace lock upvc door is to identify the type of keyway it uses. Rectangular cutout mortise locks are commonly used in aluminum patio doors while E2126 and E2079 locks sit in a recess in the frame of wood or vinyl patio doors. Uploading a photograph of the lock using a digital camera can help identify the type of lock it is.
You can also determine the kind of lock by looking at the screw holes. Most sliding patio door locks have screw holes that are aligned with the latch keeper mounted on the side jamb, however they may not be identical. For example there are screws that are larger than others and might have an end with a different threaded. Some screws also come with washers or a hex bolt attached to them which can affect the way they fit into the lock hasp.
If you are aware of the type of lock your home is secured with, you can begin preparing to replace it. First, you'll need to clean the lock with a soft cloth or brush to get rid of any debris or dirt that could hinder its operation. After the lock has been cleaned then you can apply a silicone-based grease to keep it in good shape and quiet.
It's a great idea replace the screws you have been using with a longer one. This will help you to gain an improved grip, and will allow you to install the lock with less effort. After you've done this, it's important to test the handle to determine how it interacts with the lock.
If it's not able to engage quickly it could be necessary to place an hex or washer behind the hasp to get it to hold more of the door's lip. You could even put a shim on the side of the lock keeper on the jamb to see if it aids.
Check the Lock Snib
The snib is the lock mechanism located inside your door handle. It is possible to engage and deengage the snib in order to open and close your patio doors. It is the first thing you should check when your locks aren't functioning correctly. You can also check the keepers at the top and bottom of the door frames for any misalignment or looseness which could cause them break. Verify that the snib is properly seated and that the lock hasn't become stuck or blocked in any other way.
The most common patio doors locks are steel mortise locks that secure sliding glass doors. They're inserted into the door frame and are available in various styles and designs, making them a reliable security measure. Some are designed to hold keys while others have an oval-shaped cutout, making it easy to lock and unlock.
Another option that is popular is a step-on lock that has a thumb-screw design that will securely hold your sliding doors in place without having you to turn the knob or turn the key. These locks are commonly found on older metal-framed doors however they can be used to secure vinyl or wooden-framed sliding door frames.
When you inspect your existing patio lock, note the type and size screw holes used to attach the escutcheon as well as the lock body. This will help you select a replacement lock with the appropriate screw holes to fit the specific hardware for your patio door. It's also a good idea to examine your strike plate to ensure it's securely secured.
If you have Jason Windows boltlock sliding doors between 2000 and 2009, be sure the keeper screws are secured and not loose or missing. The screws hold the snib at a partially open "vent" position, which allows airflow, but also encourage security. They are crucial to prevent the lock from breaking. All locks should be inspected and cleaned regularly to avoid corrosion, dust, dirt, or debris from obstructing their operation.
If your snib is damaged, you may be able to replace the entire strikeplate and the snib. If your snib simply needs to be aligned it can be corrected by removing the strikeplate using a a putty blade and backing out the adjustment screws (located below and above the screw). Then, you'll be required to move the strikeplate upwards or down until the engagement tongue lines up the Milgard logo.
